New material for solar hydrogen


New photoanodes promise high efficiencies in producing hydrogen in a climate-neutral way.

Image credit: HZB

Hydrogen is an important factor in a sustainable energy system. The gas stores energy in chemical form and can be used in many ways: as a fuel, a feedstock for other fuels and chemicals or even to generate electricity in fuel cells.

One solution to produce hydrogen in a climate-neutral way is the electrochemical splitting of water with the help of sunlight. This requires photoelectrodes that provide a photovoltage and photocurrent when exposed to light and at the same time do not corrode in water. Metal oxide compounds have promising prerequisites for this. For example, solar water splitting devices using bismuth vanadate (BiVO4) photoelectrodes achieve already today ~8 % solar-to-hydrogen efficiency, which is close to the material’s theoretical maximum of 9%.

To achieve efficiencies beyond 9%, new materials with a smaller band gap are needed. The metal oxide α-SnWO4 has a band gap of 1.9 eV, which is perfectly suited for photoelectrochemical water splitting. Theoretically, a photoanode made of this material could convert ~20% of the irradiated sunlight into chemical energy (stored in the form of hydrogen). Unfortunately, the compound degrades very quickly in an aqueous environment.

TEM-Image of a α-SnWO4 film (green) coated with 20 nm NiOx (pink). At the interface of α-SnWO4 and NiOx an additional interfacial layer can be observed

Thin layers of nickel oxide (NiOx) can protect the α-SnWO4 photoanode from corrosion, but were found to also significantly reduce the photovoltage. To understand why this is the case, a team led by Dr. Fatwa Abdi at the HZB Institute for Solar Fuels has analysed the α-SnWO4/NiOx interface in detail at BESSY II.

“We studied samples with different thicknesses of NiOx with hard X-ray photoelectron spectroscopy (HAXPES) at BESSY II and interpreted the measured data with results from calculations and simulations,” says Patrick Schnell, the first author of the study and a Ph.D. student in the HI-SCORE International Research School at HZB. “These results indicate that a thin oxide layer forms at the interface, which reduces the photovoltage,” explains Abdi.

Overall, the study provides new, fundamental insights into the complex nature of interfaces in metal oxide-based photoelectrodes. “These insights are very helpful for the development of low-cost, scalable metal oxide photoelectrodes,” says Abdi. α-SnWO4 is particularly promising in this regard. “We are currently working on an alternative deposition process for NiOx on α-SnWO4 that does not lead to the formation of an interfacial oxide layer, which is likely to be SnO2. If this is successful, we expect that the photoelectrochemical performance of α-SnWO4 will increase significantly.”

Reference: Patrick Schnell, et al., Interfacial Oxide Formation Limits the Photovoltage of α‐SnWO4/NiOx Photoanodes Prepared by Pulsed Laser Deposition, Advanced Energy Materials (2020). DOI: 10.1002/aenm.202003183

Press release provided by Helmholtz Berlin

Latest articles

Geopolitical Interests Let Down the Besieged People of Myanmar

There is a saying in Myanmar that...

Big Paychecks Pay Off in Self-Confidence

Can money buy you happiness? A new study suggests it's linked to greater feelings of confidence and pride.

Scientists Discover ‘Space Hurricane’ High Above The Earth

Scientists have identified a “space hurricane” ― an approximately 620-mile-wide whirling mass of plasma in the upper atmosphere above the magnetic North Pole.  The...

Celebrities Dance to Cardi B’s “Up” in TikTok Challenge

As long as TikTok keeps coming up with new dance challenges, we'll keep watching. Celebrities certainly appear to be having fun with one...

Related articles

Leave a reply

Please enter your comment!
Please enter your name here